Step 2:
Remove existing toilet.
Step 3:
Remove any fixings.
Step 4:
Replace cock.
Step 5:
Place flex outlet.
Step 6:
Install filter and hose.
Step 7:
Clean and prepare the area.
Step 8:
Place bowl onto flex drain.
Step 9:
Insert strap into flex drain connector.
Step 10:
Position bowl with enough space for water supply fittings.
Step 11:
Connect water supply to under side of toilet seat.
Step 12:
Connect water supply to under side of toilet seat.
Step 13:
Turn on water supply valve (cock) and check for leaks.
Step 14:
Remove lid and disconnect pipe.
Step 15:
Lift bowl again and silicone underneath and reposition.
Step 16:
Connect water supply to under side of toilet seat.
Step 17:
Place toilet seat assembly onto bowl & remove plastic.
